Kimber Kable Speaker Cables

KWIK 12 & 16/ 4PR/ 8PR/ 4VS/ 8VS/ 4TC/ 8TC
Monocle X/ Monocle XL/ Bifocal X/ Bifocal XL/ Connector Options

Kimber Kable 4 PR

In 1979 this classic design put KIMBER KABLE on the map and after improvements over time, is still considered the reference for affordable loudspeaker cables. Millions of feet of this remarkable cable have been sold. The construction consists of four brown and four black conductors that utilize our proven braiding technique. The aggregate wire size is two 14 awg conductors. Even the most basic systems, old and new, will benefit significantly from this legendary performer. When demonstrating KIMBER KABLE to a new dealer, this cable is used with the most modest system available. With 4PR, the system performs as if costing twice as much. Bass and treble frequencies are allowed their full extension, while dynamics emerge unrestrained. The 4PR is also an excellent cable for professional and studio use due to its inherent ability to reject noise in any cable length.
  • Four brown and Four black braided conductors
  • 2 x 14 awg / 2.08mm©
  • High-purity copper
  • Special formula polyethelene dielectric

Basic electrical specifications:

[Based on - 4PR, 2.5m, bare wire ends]
(Cp) parallel capacitance: 312.0 pF @ 20 kHz
(Ls) series inductance: 0.654 µH @ 20 kHz
(Rdc) dc loop resistance: 0.041 Ω
(Xt) total reactance: 0.0825 Ω @ 20 kHz
Frequency response ± 0.5 dB: dc - 100 kHz

Setting the Standard
Kimber Kable 4PR

Call to order - (206) 523-2269

* Cable Type
Full Range One cable per channel with two connectors at each end.
Two cables per channel terminated into two connectors at the amplifier and four at the speaker.

** Assembly
Fully assembled: completely assembled and tested cable(s).
DIY: Do-It-Yourself cable kit includes the raw cable(s), heat shrink tubing, your choice of connectors, solder and instructions; all you need to do is strip the wires, solder the ends and shrink the protective sleeves. Bare wire kit includes the raw cable(s), heat shrink tubing, and instructions only.


For questions or custom configurations please contact us

Speakerlab 6220 Roosevelt Way NE Seattle, Washington 98115 USA
Tel: (206) 523-2269 Fax: (206) 523-2389 Email:

Online Store Policies